Leak tracing and detection
UV Fluorescent Colored Tracers
UV Fluorescent Clear Tracers
Food Tracers for Water
Tracers for Oils and Fuels
Non-fluorescent color tracers
Equipment for Tracing and Diagnostics
UV Lamp Kits
Dosing Equipment
Complete Air Conditioning Tracing Kits
Complete Oil and Fuel Tracing Kits
Complete Water Tracing Kits
Smoke Generators
Inflatable Pipe Plugs
Tracing in Natural Environments
Fluorimeters and Data Loggers
Fluorescent Tracers for Maritime Safety
Powder Tracers
Concentrated Liquid Tracers
Tracing in Industrial Environments
Oil and Fuel Tracers
Colorants and Markers
Fluorescent UV Markers
Powder Contrast for Industrial Filtration
Tracers for Air Conditioning and Refrigeration Systems
Contamination Simulation
Tracers for Dry Contamination Simulations
Tracers for Wet Contamination Simulations
Contamination Simulation Kit
This product might interest you...
Fluorescein Sodium, uranine for underground water tracing, leak detection, etancheity test, infiltration testing
In the field of hydrology, thanks to its detection sensitivity and low tendency to adsorption, sodium fluorescein is widely used for mapping underground watercourses, checking hydraulic connections, transit and flow time studies, river flow measurements, infiltration water path studies, layer waterproofing checks, simulating the spreading of liquid substances....
It is also used for various network and pipe diagnostics, leak detection on roofs and terraces, as a colorimetric marker in the maritime safety field, for coloring chemical and maintenance products, for industrial penetrant testing, behavioral studies of insects and animals, the medical field, aquatic decoration, damage surveys...
KEY FEATURES :
• Chemical name: Fluorescein sodium, uranine, extra grade• Presentation: Powder: red-brown / Liquid: green-yellow• CAS number : 518-47-8• EINECS number : 208-253-3• Color Index : Acid Yellow 73, CI 45350• Threshold of detection : 0,001 mg/l• Visibility to the eye: 50 to 100 μg/L• Emission/excitation wavelength: 491nm - 515nm• Solubility: Very good - over 500 g/l• Degradation: UV; pH < 7; oxidizing micro-organisms• Adsorption: Low• Interference: Eosin• Purity: 90% min• Chloride content: ≈ 7% Moisture content• Moisture content: ≈ 5%
SYNOPTIC OF FLUORESCENT TRACERS
error Your review appreciation cannot be sent
check_circle Report sent
error Your report cannot be sent
check_circle Review sent
error Unable to send review